UnixServerAdmin

Server Administration & Management

Software RAID issue after reboot of OS

After successful installation of OS, if there are some problem to boot os in one Hard-drive, as grub issue like kernel panic or grub error 17 or other issue

1. Reboot the machine in Rescue mode

Boot: linux rescue

# chroot /mnt/sysimages
OR
# mkdir /a
# mount /dev/sdaX /a
# cd /a

# cat /proc/mdstat (UU means both disk are live)

2. Run the following commands to hotadd and rebuild the array

# mdadm /dev/md0 –add /dev/sda1
# mdadm /dev/md1 –add /dev/sda2
# mdadm /dev/md2 –add /dev/sda3

# grub-install /dev/md0    OR

# grub (GRUB shell type above command to reinstall the boot loader on both drives & reboot.)

grub> device (hd0) /dev/sda
grub> root (hd0,0)
grub> setup (hd0)

grub> device (hd1) /dev/sdb
grub> root (hd1,0)
grub> setup (hd1)

grub> quit

This is show on /boot/grub/device.map

grub> find /grub/stage1 (Find out which are the hard disks on which you can install grub)

This file show in /boot/grub/device.map

grub> device (hd0) /dev/sda
grub> root (hd0,0)
grub> setup (hd0)

Advertisements

January 20, 2014 - Posted by | RAID, Tips & Tricks, Unix/Linux | , , ,

No comments yet.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

%d bloggers like this: